Types of SSD drives

A traditional HDD stores data on a high-speed rotating disc, known as a platter. As the platter spins, an arm equipped with a pair of magnetic heads (one for each side of the platter) moves over the surfaces to read or write data. Bits of data are organized into concentric, circular tracks. Each track is divided into smaller areas called sectors. Most hard drives use a stack of platters, mounted on a central spindle with a small gap in-between them. A sector map created by the HDD records which sectors have been used as well as those that remain free.

Unlike an HDD, an SSD has no moving parts. Instead, data is written to and read from a substrate of interconnected flash memory chips. SSD manufacturers stack the memory chips in a grid to achieve varying densities. To prevent volatility, SSDs use floating gate transistors (FGRs) to hold the electrical charge. This technique enables an SSD to retain stored data even when it's not connected to a power source.

IT organizations can turn to several different types of SSDs, including:

• SLC: Single-Level Cell SSDs store a single bit in each cell, an approach that aims to produce enhanced performance, endurance and accuracy. Pricier than most other flash memory options, SLC SSDs are widely used for an extensive range of mission-critical enterprise applications and storage services.
• TLC: Less expensive than SLC is Triple-Level Cell NAND flash technology. Storing three bits per cell, TLC is typically used for applications with low performance and endurance requirements. The technology is best suited for read-intensive applications.
• MLC: Multi-Level Cell SSDs, which store two bits per cell, are generally viewed as a consumer-grade technology. While stuffing more than one bit into a memory cell conserves space, the tradeoff is a shorter useful life and diminished reliability. MLC SSDs often find a home in desktop and notebook computers.
• eMLC: Enterprise Multi-Level Cell technology aims to span the performance, reliability and price gap between SLC and MLC SSDs. While still storing two bits per cell, eMLC takes advantage of a controller that enhances reliability and performance by optimizing data placement, wear leveling and other key storage operations.
• QLC: Quad-Level Cell technology supplies more capacity than SLC, MLC and TLC NAND SSDs, but not as much extra space as might be expected. While MLC doubled the capacity of SLC, and TLC offered a 33 percent storage improvement over MLC, QLC supplies only a relatively modest 25 percent boost over TLC. Still, QLC's cost, density, speed and power efficiency attributes make it a strong choice for applications such as machine learning, data analytics and media streaming.

All types of SSDs fall into the category of "consumable media,” meaning they gradually wear out as data is written over and over to the drive. SSD failure is usually gradual, as individual cells fail and overall performance degrades,although sudden failure may occur as well. Many SSD manufacturers address the gradual failure issue, known as "wear-out," by overprovisioning their products, including slightly more memory than is actually claimed in product literature.

"All SSD manufacturers provide an endurance rating called 'drive writes per day' (DWPD), which corresponds to their expected use case," says Paul von-Stamwitz, a senior storage architect at Fujitsu Solutions Lab. Read-intensive drives, for instance, can be used in applications that have a light write workload and will therefore have a lower DWPD rating than mixed-use drives. "As long as the workload matches the DWPD rating, the SSDs should easily last throughout the warranty period," von-Stamwitz notes.

Most enterprise SSDs are based on TLC technology, primarily due to their lower cost compared to other types of NAND flash drives. TLC SSDs are typically used for routine read tasks and light-duty write operations. QLC SSDs, featuring a low DWPD that's counterbalanced by density, speed and power efficiency advantages, are frequently applied to high performance, read-intensive applications. Meanwhile, a growing number of IT organizations seeking higher performance are turning to SSDs based on 3D XPoint, an emerging class of non-volatile storage and memory devices that are faster and denser than previous NAND flash devices. "These drives are suitable for specific applications that require consistent, ultra-low latency performance such as real-time analytics," von-Stamwitz explains.

Perhaps the largest caveat associated with SSDs, other than cost and long-term wear issues, is the technology's tendency to occasionally fail without warning. "When a traditional HDD fails, there's usually a warning period of slower-than-normal performance," says Steve Buchanan, a support technician at Limestone Networks, a Dallas-based data-center services provider. On the other hand, an SSD "can crumble with zero-warning unless properly monitored with software," he notes.